Free civil calculators

Brick & block calculator

दीवार के लिए ईंटें, सीमेंट और रेत: तुरंत हिसाब

Number of bricks or blocks, cement bags and sand for a wall, with every step of the working shown.

Enter your sizes

m
m
m²
doors, windows in this wall
mm
mm
mm
mm
%
Assumptions (change if your office uses different constants)
×
wet → dry mortar
kg/m³
kg

Result

Brick count is by volume with mortar joints. For AAC blocks with thin-bed adhesive, set the joint to 3 mm and ignore the cement/sand.

How it’s calculated

    Questions

    How many bricks are there in 1 m³ of brickwork?

    With conventional 230×115×75 mm bricks and a 10 mm joint, about 390 bricks per m³ (before wastage). Modular 190×90×90 bricks give about 500 per m³. The calculator shows the exact figure for the size you enter.

    How much cement is needed for brickwork in 1:6?

    For 1 m³ of 230 mm brickwork in 1:6 mortar, roughly 1.2–1.3 bags of cement and about 0.25 m³ of sand, depending on brick size and joint thickness. Enter your wall to get the exact quantity.

    Why multiply mortar by 1.33?

    Wet mortar is less in volume than the dry cement and sand that go into it (voids, bulking of sand, wastage). 1.33 is a common rule of thumb; some offices use 1.27 or 1.30, you can change it under Assumptions.

    What is a brass of sand?

    In Maharashtra and many parts of India sand and aggregate are sold by the brass: 1 brass = 100 cubic feet ≈ 2.83 m³.

    How do I do brickwork calculation for a wall?

    Wall volume = length × height × thickness, minus doors and windows. Divide by the volume of one brick with its mortar joint to get the number of bricks; the rest of the volume is mortar, which gives cement and sand. The calculator above shows each step for your wall.

    How many bricks are needed for 1 sq ft of wall?

    For a 230 mm (9 inch) wall with conventional bricks, about 8–9 bricks per sq ft of wall face; for a 115 mm (4½ inch) wall, about 4–5. Enter your wall for the exact number.

    Need the full estimate, not just one item?

    BESTimate makes the whole government-format estimate: Measurement, Abstract and Summary in Excel, with BMC, PWD, CPWD, MJP and CIDCO rates built in. Launching 26 November 2026 · first 99 to pre-register get 50% off for 6 months.

    Pre-register free →

    More free calculators

    Made free with BESTimate by F K Consultant · bestimate.in/calculators · approximate figures, check against your drawings and local rates.