Enter your sizes
Plastering cost sample rates, change to yours
Assumptions (change if your office uses different constants)
Result
For a ceiling, enter its length and width as length and height, with one face.
How it’s calculated
Questions
How much cement is needed for 100 sq ft of 12 mm plaster?
In 1:4 mortar, 100 sq ft (9.29 m²) of 12 mm plaster needs about 1 bag of cement with the usual allowances. In 1:6 it is about 0.7 bags. Enter your area for the exact figure.
Which mix and thickness should I use?
Commonly 12 mm in 1:4 or 1:6 for internal walls, 15–20 mm in 1:4 (often in two coats) for external walls, and 6 mm in 1:3 or 1:4 for ceilings, but follow the specification of your project or rate book item.
Why add 20% and multiply by 1.27?
The 20% covers filling joints and an uneven wall surface; 1.27 converts wet mortar to the dry volume of cement and sand. Both are rules of thumb, change them under Assumptions to match your office.
What is the formula of plaster?
Wet volume = plaster area × thickness. Dry volume = wet volume × 1.20 (joints, uneven surface) × 1.27. Cement = dry volume × cement parts ÷ total parts × 1440 kg (÷ 50 for bags); sand = dry volume × sand parts ÷ total parts.
What is the plastering ratio?
Cement : sand by volume, commonly 1:4 or 1:6 for internal walls (12 mm), 1:4 for external walls (15–20 mm, often in two coats) and 1:3 or 1:4 for ceilings (6 mm). Follow your specification or rate book.
How much does plastering cost per sq ft?
It depends on local rates of cement, sand and labour. Enter your rates under Plastering cost and the calculator gives material cost, labour and cost per sq ft.
Need the full estimate, not just one item?
BESTimate makes the whole government-format estimate: Measurement, Abstract and Summary in Excel, with BMC, PWD, CPWD, MJP and CIDCO rates built in. Launching 26 November 2026 · first 99 to pre-register get 50% off for 6 months.
More free calculators
Made free with BESTimate by F K Consultant · bestimate.in/calculators · approximate figures, check against your drawings and local rates.