The drawings that work best
The closer your drawing is to these, the fewer corrections you will make.
- DWG or DXF from AutoCAD (or any CAD program). Both keep exact lines, layers and texts. The Windows software opens DWG directly; if a DWG ever shows something missing, save it as DXF (File → Save As → "AutoCAD DXF") and open that.
- A floor plan of flats, offices, shops or a building, with walls drawn to scale.
- Room names written as text inside each room: Bedroom, Kitchen, Toilet, Shop 1…
- Sizes written on the plan (dimensions). BESTimate checks its own reading against them and warns when a dimension was typed over.
- PDF is fine if it was exported from CAD (a "vector" PDF). A scanned or photographed drawing cannot be measured.
- One plan per sheet is easiest. Several floors on one sheet also work; BESTimate keeps the space between them out of the rooms.
Walls
- Draw walls as two lines (both faces), the usual architectural way. Walls up to about 600 mm thick are read when they are on a wall layer.
- Put walls on a layer named WALL (or A-WALL, BRICK, PARTITION). Then furniture, hatch and dimensions are never mistaken for walls.
- Close the corners. Wall lines that meet properly make clean rooms. A small gap at a corner can join two rooms.
- Columns on their own layer (COLUMNS) are fine; they are not counted as rooms.
Doors and windows
- Doors with a swing arc, or door blocks named DOOR / D1…, are found and counted, and they close the room at the doorway.
- Windows on a layer named WINDOW / WINDOWS / GLAZING are found even when the wall line runs straight through them.
- Labels like D1, W2, V next to an opening tell BESTimate what it is.
- A doorway drawn only as a gap (no arc, no line) may let two rooms join. Use Close here to draw the missing line; it snaps to the wall corners.
Room names
- Write one name per room, placed inside the room.
- Sheet titles ("THIRD FLOOR", "… PLAN") and furniture labels ("BED", "SOFA") are never used as room names.
- Rooms without a name show as "Room (no name)". Type the name in the Rooms panel.
- Staircases are recognised from the steps and kept as their own zone.
Units and scale
- DXF: set the drawing units in AutoCAD (UNITS command → mm, m, inches or feet). BESTimate reads them; you can change them in the Units box.
- PDF: the scale written on the sheet (SCALE 1:50) is used. If it is missing, choose the paper scale or use Set scale and click a line of known length.
- BESTimate warns when room sizes look wrong for the scale, with a one-click fix.
What to check before you send a BOQ
- The Checks list in the drawing brief: joined rooms, typed-over dimensions, scale warnings. Each has a Show button.
- Any room that looks too big or too small for its name; hover a room in the list to see it on the plan. If an automatic room is wrong, draw it with Draw room instead: what you draw is exactly what is measured.
- Door and window counts against the drawing.
- Heights (wall, door, window, sill) in the Rooms panel; plans do not show heights, so defaults are used until you change them.
- Open the Excel and look through the Measurement sheet: every quantity is written as L × B × H, so it can be checked line by line.
What it cannot do (yet)
- Read scanned drawings, photos or hand sketches.
- Know heights, finishes or specifications that are not in the drawing.
- Read structural sheets (footings, trusses, reinforcement) as rooms. Use Semi auto and click the lines you want to measure.
Finding rooms automatically is marked Beta in the software (Draw room is not) and improves with every update. If a drawing reads wrongly, send it to us through Feedback in the software; real drawings are how it gets better.
Your responsibility
BESTimate is a tool for engineers and architects. It does the measuring and the arithmetic, but the professional who signs the estimate is responsible for checking the quantities, rates and specifications against the drawings and the site. Always review the rooms, areas and the Excel before you submit or send it.